LCD787-9SC
Liangye
| Quantity: | |
|---|---|
This LIANGYE 20V Battery Cordless Hammer Drill is designed for the professional carpenter, remodeler, and general contractors who rely on high-performing and durable tools. It is engineered to provide reliable operation and a long service life under various operating conditions with excellent drilling capacity.
The clutch with adjustable torque and paddle of 2-speed choice for driving and removing a wide array of fastener shapes and sizes. Equipped with the max. torque of 70 N.m and the impact power up to 30,000 BPM, allowing your work to be way easier than with the normal drill. Besides, the Spindle lock, LED work light, Forward/reverse switch, Electric brake are all available.
KEY FEATURES | |
Model No. | LCD787-9SC |
Voltage | 20V[Li-ion] |
No-Load Speed | 0-550 RPM / 0-2000 RPM |
Impact Rate | 0-7500 BPM / 0-30000 BPM |
Torque Setting | 24*3 [Function] |
Max Torque | 70N.m |
Chuck | 2-13 mm metal chuck with self-lock system |
1. 20V Battery Power: offers sufficient power for a wide range of impact drilling applications.
2. Forward/ reverse switch to change the rotation direction of the drill bit.
3. The LED Work Light: The work light illuminates the work surface, enabling you to work with precision and confidence. The light will be turned off 10 seconds after the trigger is released.
4. Integrated Bell hook for easy storage.
5. Metal Chuck: Keyless metal chuck ensures confident strength and durability.
6. Electric brake to stop drilling after trigger is released.
Recommendations for Hammer Drilling:
• When drilling, always apply pressure in a straight line with the bit, but do not push hard enough to stall the motor or deflect the bit.
• Too much force will cause slower drilling speeds, overheating, and a lower drilling rate.
• A smooth even flow of material indicates the proper drilling rate.
• Drill straight, keeping the bit at a right angle to the work. Do not exert side pressure on the bit when drilling as this will cause clogging of the bit flutes and a slower drilling speed.
• When drilling deep holes, if the hammer speed starts to drop off, pull the bit partially out of the hole with tool still running to help clear debris from the hole.
This LIANGYE 20V Battery Cordless Hammer Drill is designed for the professional carpenter, remodeler, and general contractors who rely on high-performing and durable tools. It is engineered to provide reliable operation and a long service life under various operating conditions with excellent drilling capacity.
The clutch with adjustable torque and paddle of 2-speed choice for driving and removing a wide array of fastener shapes and sizes. Equipped with the max. torque of 70 N.m and the impact power up to 30,000 BPM, allowing your work to be way easier than with the normal drill. Besides, the Spindle lock, LED work light, Forward/reverse switch, Electric brake are all available.
KEY FEATURES | |
Model No. | LCD787-9SC |
Voltage | 20V[Li-ion] |
No-Load Speed | 0-550 RPM / 0-2000 RPM |
Impact Rate | 0-7500 BPM / 0-30000 BPM |
Torque Setting | 24*3 [Function] |
Max Torque | 70N.m |
Chuck | 2-13 mm metal chuck with self-lock system |
1. 20V Battery Power: offers sufficient power for a wide range of impact drilling applications.
2. Forward/ reverse switch to change the rotation direction of the drill bit.
3. The LED Work Light: The work light illuminates the work surface, enabling you to work with precision and confidence. The light will be turned off 10 seconds after the trigger is released.
4. Integrated Bell hook for easy storage.
5. Metal Chuck: Keyless metal chuck ensures confident strength and durability.
6. Electric brake to stop drilling after trigger is released.
Recommendations for Hammer Drilling:
• When drilling, always apply pressure in a straight line with the bit, but do not push hard enough to stall the motor or deflect the bit.
• Too much force will cause slower drilling speeds, overheating, and a lower drilling rate.
• A smooth even flow of material indicates the proper drilling rate.
• Drill straight, keeping the bit at a right angle to the work. Do not exert side pressure on the bit when drilling as this will cause clogging of the bit flutes and a slower drilling speed.
• When drilling deep holes, if the hammer speed starts to drop off, pull the bit partially out of the hole with tool still running to help clear debris from the hole.
