LIANGYE 20V Battery LCD777-8SC Cordless Hammer Drill is engineered to provide reliable operation and extended use under various operating conditions. The excellent drilling capacity relies on its 2-speed control and impact power with up to 7,500 or 25,500 BPM. Plus, this hammer drill is equipped with an adjustable clutch for variable torque settings for driving and removing a wide array of fastener shapes and sizes. Remember, the higher the number on the collar is, the higher torque will be. Torque Setting is 16+3. Max Torque is 50N.m
KEY FEATURES | |
Model No. | LCD777-8SC |
Voltage | 20V[Li-ion] |
No-Load Speed | 0-500 RPM / 0-1700 RPM |
Impact Rate | 0-7500 BPM / 0-25500 BPM |
Torque Setting | 16+3 [Function] |
Max Torque | 50N.m |
Chuck | 2-13 mm metal chuck with self-lock system |
1. 20V Battery offers sufficient power for a wide range of drilling and screw driving applications.
2. Turn the forward/ reverse switch to change the direction of rotation.
3. The LED work light is activated when the trigger switch is depressed, and will automatically turn off 10 seconds after the trigger switch is released.
4. Integrated Bell hook for easy storage.
5. Electric brake to stop drill after trigger is released.
Recommendations for Drilling:
• When drilling, always apply pressure in a straight line with the bit, but do not push hard enough to stall the motor or deflect the bit.
• Too much force will cause slower drilling speeds, overheating, and a lower drilling rate.
• When drilling deep holes, if the hammer speed starts to drop off, pull the bit partially out of the hole with tool still running to help clear debris from the hole. Then pull the trigger switch applying pressure in a straight line with the bit until it reaches the desired depth.
LIANGYE 20V Battery LCD777-8SC Cordless Hammer Drill is engineered to provide reliable operation and extended use under various operating conditions. The excellent drilling capacity relies on its 2-speed control and impact power with up to 7,500 or 25,500 BPM. Plus, this hammer drill is equipped with an adjustable clutch for variable torque settings for driving and removing a wide array of fastener shapes and sizes. Remember, the higher the number on the collar is, the higher torque will be. Torque Setting is 16+3. Max Torque is 50N.m
KEY FEATURES | |
Model No. | LCD777-8SC |
Voltage | 20V[Li-ion] |
No-Load Speed | 0-500 RPM / 0-1700 RPM |
Impact Rate | 0-7500 BPM / 0-25500 BPM |
Torque Setting | 16+3 [Function] |
Max Torque | 50N.m |
Chuck | 2-13 mm metal chuck with self-lock system |
1. 20V Battery offers sufficient power for a wide range of drilling and screw driving applications.
2. Turn the forward/ reverse switch to change the direction of rotation.
3. The LED work light is activated when the trigger switch is depressed, and will automatically turn off 10 seconds after the trigger switch is released.
4. Integrated Bell hook for easy storage.
5. Electric brake to stop drill after trigger is released.
Recommendations for Drilling:
• When drilling, always apply pressure in a straight line with the bit, but do not push hard enough to stall the motor or deflect the bit.
• Too much force will cause slower drilling speeds, overheating, and a lower drilling rate.
• When drilling deep holes, if the hammer speed starts to drop off, pull the bit partially out of the hole with tool still running to help clear debris from the hole. Then pull the trigger switch applying pressure in a straight line with the bit until it reaches the desired depth.
