LIANGYE 20V Battery Cordless Drill, is designed for the professional carpenter, remodeler, and general contractors who rely on high-performing and durable tools.
It is engineered to provide reliable operation and a long service life under normal operating conditions. It has Excellent drilling capacity.
This tool has a clutch with adjustable torque for driving and removing a wide array of fastener shapes and sizes, with variable speed.
The numbers on the mode selection collar are used to set a torque range for screw driving.
The higher the number on the collar, the higher the torque will be.
The Spindle lock, LED work light, Forward/reverse switch, Electric brake are all simple and practical, easy to operate.
KEY FEATURES | |
Model No. | LCD787-8S |
Voltage | 20V[Li-ion] |
No-Load Speed | 0-500 RPM / 0-1700 RPM |
Torque Setting | 18+1 |
Max Torque | 50N.m |
Chuck | 2-13 mm metal chuck with self-lock system |
1. 20V Battery offers sufficient power for a wide range of impact drilling applications.
2. Turn the forward/ reverse switch on the control panel to change the direction of rotation of the drill bit.
3. The LED work light is activated when the trigger switch is depressed, and will automatically turn off 10 seconds after the trigger switch is released.
If the trigger switch remains depressed, the LED work light will remain on.
4. Integrated Bell hook for easy storage.
5. Electric brake to stop drill after trigger is released.
Recommendations for Drilling:
• When drilling, always apply pressure in a straight line with the bit, but do not push hard enough to stall the motor or deflect the bit.
• Too much force will cause slower drilling speeds, overheating, and a lower drilling rate.
• A smooth even flow of material indicates the proper drilling rate.
• Drill straight, keeping the bit at a right angle to the work. Do not exert side pressure on the bit when drilling as this will cause clogging of the bit flutes and a slower drilling speed.
• When drilling deep holes, if the hammer speed starts to drop off, pull the bit partially out of the hole with tool still running to help clear debris from the hole.
Drilling
Turn the mode selection collar to the drill symbol. Refer to Mode Selection.
Place drill bit in contact with the work piece.
NOTE: Use sharp drill bits only.
For WOOD, use twist drill bits, spade bits, auger bits, selffeed bits, or hole saws.
For METAL, use twist drill bits, step bits, carbide hole cutters or hole saws.
Drill bits should be optimized for METAL cutting with appropriate coatings and cutting edges.
Pull the trigger switch applying pressure in a straight line with the bit until it reaches the desired depth.
LIANGYE 20V Battery Cordless Drill, is designed for the professional carpenter, remodeler, and general contractors who rely on high-performing and durable tools.
It is engineered to provide reliable operation and a long service life under normal operating conditions. It has Excellent drilling capacity.
This tool has a clutch with adjustable torque for driving and removing a wide array of fastener shapes and sizes, with variable speed.
The numbers on the mode selection collar are used to set a torque range for screw driving.
The higher the number on the collar, the higher the torque will be.
The Spindle lock, LED work light, Forward/reverse switch, Electric brake are all simple and practical, easy to operate.
KEY FEATURES | |
Model No. | LCD787-8S |
Voltage | 20V[Li-ion] |
No-Load Speed | 0-500 RPM / 0-1700 RPM |
Torque Setting | 18+1 |
Max Torque | 50N.m |
Chuck | 2-13 mm metal chuck with self-lock system |
1. 20V Battery offers sufficient power for a wide range of impact drilling applications.
2. Turn the forward/ reverse switch on the control panel to change the direction of rotation of the drill bit.
3. The LED work light is activated when the trigger switch is depressed, and will automatically turn off 10 seconds after the trigger switch is released.
If the trigger switch remains depressed, the LED work light will remain on.
4. Integrated Bell hook for easy storage.
5. Electric brake to stop drill after trigger is released.
Recommendations for Drilling:
• When drilling, always apply pressure in a straight line with the bit, but do not push hard enough to stall the motor or deflect the bit.
• Too much force will cause slower drilling speeds, overheating, and a lower drilling rate.
• A smooth even flow of material indicates the proper drilling rate.
• Drill straight, keeping the bit at a right angle to the work. Do not exert side pressure on the bit when drilling as this will cause clogging of the bit flutes and a slower drilling speed.
• When drilling deep holes, if the hammer speed starts to drop off, pull the bit partially out of the hole with tool still running to help clear debris from the hole.
Drilling
Turn the mode selection collar to the drill symbol. Refer to Mode Selection.
Place drill bit in contact with the work piece.
NOTE: Use sharp drill bits only.
For WOOD, use twist drill bits, spade bits, auger bits, selffeed bits, or hole saws.
For METAL, use twist drill bits, step bits, carbide hole cutters or hole saws.
Drill bits should be optimized for METAL cutting with appropriate coatings and cutting edges.
Pull the trigger switch applying pressure in a straight line with the bit until it reaches the desired depth.
