LIANGYE 20V Battery LCD777-1S Cordless Drill, featured with 2-speed choices of the no- load speed 0-400 RPM / 0-1400 RPM, is ideal for the professional carpenter, remodeler, and general contractors who rely on high-performing and convenient tools.
This cordless drill has a clutch with adjustable torque for driving and removing a wide array of fastener shapes and sizes. The numbers on the mode selection collar are used to set a torque range for screw driving. The higher the number on the collar is, the higher the torque will be. Torque Setting is 25+1. Max Torque is 35N.m.
KEY FEATURES | |
Model No. | LCD777-1S |
Voltage | 20V[Li-ion] |
No-Load Speed | 0-400 RPM / 0-1400 RPM |
Torque Setting | 25+1 |
Max Torque | 35N.m |
Chuck | 2-13 mm metal chuck with self-lock system |
1. 20V Battery offers sufficient power for a wide range of impact drilling applications.
2. Turn the forward/ reverse switch to change the direction of rotation.
3. The LED work light is activated when the trigger switch is depressed, and will automatically turn off 10 seconds after the trigger switch is released. If the trigger switch remains depressed, the LED work light will remain on.
4. Integrated Bell hook for easy storage.
5. Ergonomic designed grip to reduce the fatigue for prolonged use.
6. Electric brake to stop drill after trigger is released.
Recommendations for Drilling:
• When drilling, always apply pressure in a straight line with the bit, but do not push hard enough to stall the motor or deflect the bit.
• Too much force will cause slower drilling speeds, overheating, and a lower drilling rate.
• A smooth even flow of material indicates the proper drilling rate.
• Drill straight: keeping the bit at a right angle to the work. Do not exert side pressure on the bit when drilling as this will cause clogging of the bit flutes and a slower drilling speed.
• When drilling deep holes, if the hammer speed starts to drop off, pull the bit partially out of the hole with tool still running to help clear debris from the hole.
LIANGYE 20V Battery LCD777-1S Cordless Drill, featured with 2-speed choices of the no- load speed 0-400 RPM / 0-1400 RPM, is ideal for the professional carpenter, remodeler, and general contractors who rely on high-performing and convenient tools.
This cordless drill has a clutch with adjustable torque for driving and removing a wide array of fastener shapes and sizes. The numbers on the mode selection collar are used to set a torque range for screw driving. The higher the number on the collar is, the higher the torque will be. Torque Setting is 25+1. Max Torque is 35N.m.
KEY FEATURES | |
Model No. | LCD777-1S |
Voltage | 20V[Li-ion] |
No-Load Speed | 0-400 RPM / 0-1400 RPM |
Torque Setting | 25+1 |
Max Torque | 35N.m |
Chuck | 2-13 mm metal chuck with self-lock system |
1. 20V Battery offers sufficient power for a wide range of impact drilling applications.
2. Turn the forward/ reverse switch to change the direction of rotation.
3. The LED work light is activated when the trigger switch is depressed, and will automatically turn off 10 seconds after the trigger switch is released. If the trigger switch remains depressed, the LED work light will remain on.
4. Integrated Bell hook for easy storage.
5. Ergonomic designed grip to reduce the fatigue for prolonged use.
6. Electric brake to stop drill after trigger is released.
Recommendations for Drilling:
• When drilling, always apply pressure in a straight line with the bit, but do not push hard enough to stall the motor or deflect the bit.
• Too much force will cause slower drilling speeds, overheating, and a lower drilling rate.
• A smooth even flow of material indicates the proper drilling rate.
• Drill straight: keeping the bit at a right angle to the work. Do not exert side pressure on the bit when drilling as this will cause clogging of the bit flutes and a slower drilling speed.
• When drilling deep holes, if the hammer speed starts to drop off, pull the bit partially out of the hole with tool still running to help clear debris from the hole.
